New from Pa....

Just sign up with Bowtie V6? Say hello to your new friends!

Newbie
Posts: 3
Joined: Wed Apr 23, 2014 8:13 pm
PostPosted: Thu Apr 24, 2014 8:01 am
1947996_4047709966379_42660383_n.jpg
My 2013 Camaro
Hello My name is Don I just bout a 2013 camaro v6 manual. This is my 2nd camaro my first was a 91 RS. I have always had a love for this car... now the fun begins to moding this beast. I am also looking for friends in Pa. I am new to this forum stuff.
User avatar
Running 11s
Posts: 1354
Joined: Wed Jan 12, 2011 2:34 pm
Location: Michigan
PostPosted: Thu Apr 24, 2014 8:16 pm
Welcome to BowtieV6!
MRT V1/ Injen CAI/ VMax TB/ RX Catch Can/ TrifectaImage
User avatar
Full Blown Post Whoring Vet
Posts: 7556
Joined: Wed Jan 12, 2011 12:18 pm
Location: Clarkston, Michigan
PostPosted: Fri Apr 25, 2014 5:11 am
Hello and Welcome to BowtieV6.com. If you should have any questions, post them up, someone will be along to help. In the meantime be sure to check out the forum. Lots of good info posted here.
Image
for my build check here...http://bowtiev6.com/forum/viewtopic.php?f=28&t=57 ..........................................................TEAM LLT

Newbie
Posts: 3
Joined: Wed Apr 23, 2014 8:13 pm
PostPosted: Sat Apr 26, 2014 7:20 pm
I do have a question I am searching for a exhaust system for my camaro. I like the flow master brand but unsure of what will make mine sound mean. I think i had the 40 delta dual system on my 91 rs that i had. Unsure what to choose since i took my old car to a shop. Also should i attempt to install on my own or should i just take it to a shop.
User avatar
Full Blown Post Whoring Vet
Posts: 7556
Joined: Wed Jan 12, 2011 12:18 pm
Location: Clarkston, Michigan
PostPosted: Sun Apr 27, 2014 12:11 am
Almost everyone who buys the MRT 2.0's loves them. easy to install. Then if you want them welded take them to a shop to have that done for a small fee. These are the most popular axle back set-up's for our Camaro.
Image
for my build check here...http://bowtiev6.com/forum/viewtopic.php?f=28&t=57 ..........................................................TEAM LLT
User avatar
Laying rubber
Posts: 417
Joined: Sat Mar 26, 2011 10:09 am
Location: Royal Oak, MI
PostPosted: Mon Apr 28, 2014 7:53 pm
Welcome to the site! :wave:

I installed the Magnaflow catback set-up on my 2010. Overall, I'm quite pleased with the performance and quality. It's still clamped together however, as I have not taken the opportunity to have the system welded.
2LT/RS/M6/ABM with blk stripes/GM splash guards/CAI intake/Magnaflow cat-back/Elite tunnel brace/Hurst shifter/RX Catch Can

Return to Member Introductions

Who is online

Users browsing this forum: No registered users and 1 guest